ADVANTAGES
- Excellent adhesive for a wide range of materials.
- Forms an elastic strong waterproof glue line.
- Ideally suitable for repairing footwear in specialized workshops, companies, and individually.
- Does not contain toluene or other solvents with narcotic effect.
- Cold-resistant.
- Sold fully ready for use (no stirring needed).
GENERAL INFORMATION
The Master® multi-purpose water-resistant adhesive (TU 2513-001-17483468-92) is a solution of synthetic adhesive rubber and highly efficient adhesive additives in the mixture of ethyl acetate and solvent petroleum spirit.
PURPOSE
The adhesive is designed for gluing the following materials in any combinations: rubber, thermoplastic elastomer, polyurethane rubber, genuine and artificial leather (except PVC), textile, wood, cellulosic materials (paper, cardboard, etc.), glass, metals, as well as such plastics, as polystyrene, polyethylene, polypropene, polyurethane foam, phenoaminoplastics, polycarbonate, etc., used in any climatic conditions from -40 to +60°C. The adhesive is widely used when making and repairing footwear, in different fields of industry, in construction, and by individuals. The glue line is higly elastic and water-resistant.
The product was permitted for application by the Center of Sanitary and Epidomiological Control of Moscow.
SPECIFICATIONS
| No. |
Criteria description |
Norm |
| 1 |
Visual appearance |
Viscous fluid, dark-brown in color |
| 2 |
Relative viscosity at 20±1°C, c |
50-100 |
| 3 |
Content of non-volatile substances, % |
38-50 |
| 4 |
Adhesive strength of the glue line by splitting, kg/cm: |
| Rubber /rubber: |
|
| - based on natural, styrene, isoprene rubber |
3.0 |
| - based on nitrile rubber |
1.5-2.5 |
| Tarpaulin /tarpaulin |
3.3 |
BRIEF APPLICATION INSTRUCTIONS
If necessary, the glued surfaces shoul be conditioned, degreased, and dried.
Cold Technique. Apply a thin layer of glue to the glued surfaces, leave for 1 to 8 minutes, depending on the material. The glued surfaces should be firmly pressed against each other and left under pressure for 24 hours. When gluing well absorbing materials, apply the glue twice with an interval of at least 5 minutes.
Hot Technique. Dry the applied adhesive layer during 20-30 minutes. After that warm the glued surfaces during 2 minutes at 80-85°C (hair-drier, electric cooker, etc.), and press them against each other for 3-5 minutes. The item can be used after 4 hours.
Use ethyl acetate to dilute the adhesive by its thickening as a result of the solvents' evaporation and to clean the instruments.
Storage conditions: store the adhesive in a tightly sealed container at the temperature of -40 to +40°C.
Warranty shelf life - 12 months from date of manufacture.
Adhesives Produced by NPP Rogneda CJSC Comparative Table of Various Brands and Application Instructions.
|
![Master Adhesive (multi-purpose, water-resistant)](javascript:openImage("files/images/Master-20-L-big.jpg"))